Roofing startup costs include a truck and trailer or dump trailer, ladders and safety equipment, nail guns and compressors, tear-off tools, insurance (often a large line), licensing and marketing. Materials are usually purchased per job. Track job costing carefully: materials, disposal, labor, and permit fees per roof.
Job costing sheet
| Line | Notes |
|---|---|
| Materials | Squares of shingles, underlayment, flashing |
| Disposal | Dumpster or trailer fees |
| Labor | Crew hours or sub price |
| Permit | Local fee |
| Overhead and profit | Your target margin |
Worked example
A roof measured at 25 squares, with materials priced per square from your supplier, plus disposal, labor and permit, gives a direct cost. Add overhead and profit to set the bid. Always measure or use a measurement report, then add waste for hips and valleys.
Itemized budget
| Line | What it covers | How to get the number |
|---|---|---|
| Trucks and dump trailer | Crew transport and tear-off disposal | Dealer quotes |
| Fall protection | Harnesses, anchors, lifelines, guardrails | Supplier quotes |
| Ladders and hoist | Access and material lifting | Supplier quotes |
| Nail guns and compressors | Installation tools | Supplier quotes |
| Hand tools | Shovels, pry bars, snips | Supply list |
| Insurance | Liability and workers' comp | Agent quotes |
| Licensing and permits | State and local fees | Agency schedules |
| Software | Measurements, estimates, CRM | Monthly plans |
| Website | Projects, inspection form | From $399 plus $30/month Website Care |
Disposal and dumpster costs
Tear-off debris is heavy. Price dumpsters or landfill fees per job, and protect driveways and landscaping with tarps and boards. Magnetic sweepers for nails are a small cost that prevents complaints.
Worked example: costing a reroof
Kim measures the roof (or uses aerial measurement reports), calculates squares including waste for cuts and hips, and lists materials: shingles, underlayment, ice and water barrier where required, starter, ridge cap, flashing, vents and nails. She adds tear-off labor by layers and pitch, disposal, permit, crew labor for installation, equipment and overhead, then margin. She includes a per-sheet price for any rotten decking found after tear-off.
One-time costs
| Item | Your quote |
|---|---|
| Equipment and safety gear | $ ______ |
| Truck and trailer | $ ______ |
| Licensing and bonding | $ ______ |
| Website build and domain | $ ______ |
Monthly costs
| Item | Your quote |
|---|---|
| Insurance | $ ______ / month |
| Fuel | $ ______ / month |
| Disposal | $ ______ / month |
| Marketing | $ ______ / month |
| Software | $ ______ / month |
| Website care | $ ______ / month |
Free tools
Common questions
What is a roofing square?
100 square feet of roof area, the common unit for materials and pricing.
Why is roofing insurance expensive?
Work at height carries higher injury risk.
Should I buy a dump trailer?
It can save disposal costs once you do steady tear-offs.
How much waste should I add?
It depends on roof complexity; simple gable roofs need less than roofs with many hips and valleys.
Sources
Sources checked October 6, 2026. Rules, fees and forms change; confirm details with the agency or provider before you act. This guide is general information, not legal, tax or insurance advice.
Get your website-ready checklist, then see starter options
Fill in the free website-ready checklist while you set up. When you are ready, starter websites begin at $399 with your domain included. Start with the free checklist.
See starter website optionsKeep going
Spot something out of date?
Fees, forms and rules change. If something on this page looks wrong or outdated, tell us and we will check it.